Perfect TV reception no matter where you are: 
The Precision Satellite TV System by Maxview is a complete, ready to use kit that will work perfectly with your satellite Pay TV decoder or just add on one of our free to air VAST decoders or VAST TV's for perfect satellite TV reception anywhere.

Winning, innovative design:

Lightweight, precise adjustment of direction and elevation, fold up LNB arm, built in satellite meter, flexible coax cable and more. Read below to find out why the Precision is simply the best satellite dish kit available.


The Precision is lightweight and compact.  The tripod weighs a mere 1.5KG and the dish only 4KG.  Both include stowage bags and are easily stored in the back of the 4WD or in the caravan.  ​

The fold down LNB arm on the front adheres to the dish with a magnet for easy setup and packing away. The tripod features a bubble level and the legs have peg holes and must be pegged to the ground (below left).


Note the arrow on one leg.  Aim this leg to North and the Maxview Precision will only permit rotation within the reception zone of the satellite making it even easier to locate the signal (below middle).

The Precision dish is an all in one unit so no need for screwdrivers or spanners.  Simply drop the head unit onto the tripod mast and fold out the LNB arm (below right). 

Your system will now look like this, ready to connect the included flexible cable/s.


Accurate elevation adjustment of the dish is necessary to find the satellite signal and the Precision features a unique and accurate elevation mechanism.  Fine tuning is performed by rotating the knob on the rear of the body.  ​


Finding the satellite is easy with the built in signal finder.  Pan the dish side to side and look out for the digital LED's lighting up and the high tone increasing in pitch.  Then, simply turn the sensitivity control anti-clockwise to switch off.


  • Satellite dish and head unit 

  • Fitted with twin output 10700 LNB ready for VAST or Foxtel)

  • Aluminium tripod

  • Built in satellite finder

  • Stowage bags for dish and tripod

  • 10m flexible coaxial cable (single)

  • 3 x 8mm pegs

  • Drawbar mast

  • Weatherproof EziPlate wall fitting

  • 1m internal coaxial cable


For a limited time, we're including a BONUS drawbar mast so you can mount the dish on your A-frame (remove while driving).  The mast is 79cm long (115cm including the rear dish mount) and all you need supply is a jockey wheel clamp (call us if you require a supplier - we will be sourcing these shortly.  BONUS weatherproof wallfitting and internal 1.0m coaxial cable.

We love the Maxview Precision and we're sure you will too. If you need anymore information, feel free to contact us on
​07 5455 5528or email

For a full range of satellite equipment visit SatPlus

© 2021 Queensland Satellites